Products Technologies NI-CD
 

 

  Nickel-Cadmium batteries - SBL, SBM, SBH  

Main Applications
Ni-Cd block battery are suitable for numerous industrial stationary applications :
Power back-up
Starting
Bulk energy storage

The Saft block battery range use pocket plate technology.
 
Benefits
Your benefit is peace of mind and a low overall cost thanks to the following block batteries features :
Trouble-free long service life
Low overall cost
Reliability, no risk of sudden death or thermal runaway
Low maintenance
Large operating temperature range

The block battery range consists of :
SBL blocks, from 7.5 Ah to 1540 Ah for standby energy over
... relatively long discharge periods.
SBM blocks, from 11 Ah to 1390 Ah for autonomies between 30
... minutes and 3 hours or mixed loads with high peak demands.
SBH blocks, from 8.3 Ah to 920 Ah for power requirements over
... short periods and for engine starting.
 
Configuration
The Saft block battery range is composed of modular pocket plate cells in translucent polypropylene containers welded together into blocks by heat sealing. They have a large electrolyte reserve.
 
Pocket plate technology
The positive and negative electrodes consist of rectangular perforated steel pockets that are interlaced and pressed into a base to form a very strong plate.

  Ni-Cd SPL batteries  

The Saft low maintenance ranges build upon all the advantages of proven Ni-Cd flooded electrolyte technology in a comprehensive range of pocket plate products. These batteries recombine gases within cells to prevent water loss under normal operating conditions. In this way Saft's Ni-Cd technology works in tandem with your application for up to twenty years without repeated checks for topping-up while maintaining the twenty plus years life of the product.

SPL cells are designed for standby energy over relatively long discharge periods.

Saft SPL batteries are a reliable energy source for outdoor conditions; they need minimal maintenance and have good cycling capability. It's a range suited to all standard railroad voltages and for all trackside and highway power requirements, from providing back-up D.C. power to a single signal mast, or peak power provision for groups of switch motors, to large uninterruptible power supplies.

The range is available in a capacity range from 80 Ah to 420 Ah.